Availability:
Estimated Arrival: Between May 03 and May 09. *ETA to the USA Only
Shipping & Returns: Free Shipping on Most Orders $75 and Up.
The Tank Mixer "Without the Pump" currently we have ONE IN STOCK
The Tank Mixer "With the Pump" is currently on Back Order
Tank mixers allow you to introduce So2, wine additives or fining agents into a tank and get a homogeneous mixture. Makes better wine much, much easier. The mixer with cart and speed control is designed for quality conscious wine makers who want to be able to vary the speed to the size of the tank to reduce shear and possible oxidation at the wine surface.
Your tank(s) will require a 2” Tri-Clamp Ball valve to be installed on the tank (prior to filling!) so that the mixer can be connected, the ball valve opened, and the mixing shaft slid through that valve and into the tank.
The trolley is adjustable in height and angle so that the mixer can be connected into horizontal ports or into 45 degree mixing ports, like we feature on most Speidel tanks.
Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accommodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks.
The included pump is a very unique feature that allows you to pump a slurry out of a bucket, into the mixer and into the tank. This saves time by not having to open the top hatch, reduces possible oxidation, and ensures a better mix.
How to Use
Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve. Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on. Adjust the speed to accommodate your desired level of agitation. To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve.
For Use in Beer:
Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank.
Features:
- All parts in contact with the liquid are made of stainless steel AISI 304.
- 0.75 kw power, speed 0-1400 RPM
- Euro 20 pump included or purchase without pump
- Single phase power supply
- Rod length 650 mm
- Width 155 mm propeller
- Stainless cart
Shipping Limitation: This item ships freight only - Additional Shipping Charges Apply at Checkout.
California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Documents