BrewZilla All Grain Brewing System With Pump | Gen 3.1.1 | 35L/9.25G (110V)

The BrewZilla is an all-in-one electric brewing system that has built-in elements for heating and boiling, programmable mash schedule and delayed startt, a built-in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere. 

The V3.1.1 unit features an upgraded main circuit board that changes how the automatic step mashing functions. Now when moving from step to step, the timer for each step will not begin counting down until the programmed temperature is reached. This means more accurate mash schedules than ever before! The new board also introduces boil addition timers so you'll never miss the mark for hop additions.

New accessory! Check out the BrewZilla Whirlpool Arm, which uses the unit's internal pump to recirculate and spin the wort, improving hop extraction and chill times. No more stirring!

We highly recommend adding the optional BrewZilla Neoprene Jacket to help reduce heating times and maintain a more vigorous boil. The extra thick neoprene jacket is custom designed to insulate the entire kettle portion of the BrewZilla while staying out of the way of the ball valve and handles. The jacket can help you acheive up to 10% faster heat up times and cut heat loss from the boiler in half.

The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the BrewZilla and tabs at the base so you can set the malt pipe over the BrewZilla to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included stainless wort chillers is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.  

Note: The manual references an element for a different market.  This unit comes with two heating elements for a total of 1,500 watts.

• Stainless steel construction

• 9 gallon total capacity with a finished beer output of 5-6 gallons

• Digital temperature controller
  
• Automatic step mashing with 6 programmable stages
  
• 110V power and plug
  
• Dual heating elements for total control (1000 watts and 500 watts)
  
• Stainless steel 1/2 in ball valve for draining (don't have to use the pump)
  
• Immersion wort chiller included
  
• Stainless steel malt pipe/basket
  
• Stamped volume markers
  
• Glass lid
  
• Magnetic drive pump for recirculation
  
• Recirculation arm
  
• Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
  
• 32.75 in H (with recirculation arm) x 12.5 in D
  
• Recommended max. grain bill - 18 lbs
  
• Recommended min. grain bill - 8 lbs

   California Recipients: WARNING: - www.P65Warnings.ca.gov